€139.95*
% €155.40* (9.94% saved)Free shipping
The Fusionskin® Ceramic 3+ Set, in this set is everything you need for the perfect ceramic sealing of the car.
Contents:
1x Fusionskin Final Check 500ml
1x Fusionskin Ceramic 3+ 50ml
1x Fusionskin Ceramic Sponge microfiber applicator
10x Fusionskin Allrounder
50ml are measured for 1 vehicle.
Our coating "Ceramic 3+" is a covalent surface coating, which was developed to protect painted, foiled or powdered surfaces optimally and permanently. Like all Fusionskin products, the sealant was 100% developed, produced and thoroughly tested in Germany!
The Ceramic 3+ forms an ultra-thin anti-stick layer. This is extremely dirt-repellent, resilient and hard. It deepens it the gloss and color intensity of the paint surface extremely.
The ceramic sealant bonds chemically (covalently) with the surface and covers the paint pores. After curing, it forms a high-gloss protective layer. This simple type of surface finishing protects the paint from damage such as corrosion, salt, acids, mechanical influences and insects. This makes it very difficult for dirt to adhere to the surface, which makes cleaning child's play.
Mere hand washing alone will cause wear and tear such as fading and micro scratches. When your vehicle is sealed with our Ceramic 3+, these are reduced to a minimum and the paint surface is sustainably protected.
Self-leveling, permanent barrier layer
Binds chemically to the treated substrate,
Excellent corrosion protection
Easy-to-clean properties (ETC coating)
Applies and bonds to the substrate at the molecular level
Permanent coating creates a glass-like barrier layer only a few µm thick
High chemical and mechanical resistance with high surface tension (hydrophobic properties)
Temperature resistance up to approx. 1000°C.
Self-leveling or microplanarization provides no adhesion for dirt particles
Permanent gloss and color intensifying effect
Durability at least 3 to 5 years
CERTIFIED ACCORDING TO: DIN EN ISO 9227, DIN EN ISO 6270-2, DIN EN ISO 16474-2, DIN 50021
Preparation:
1. the ambient temperature should ideally be between 20 and 30 degrees.
2. prepare the surface free from scratches perfectly and degrease with Fusionskin Final Check.
The preparation process can be analogous to conventional / known coating substrates.
Application:
Important: NO multi-layer process possible.
The substrate, whether "Ceramic 3+" or "Ceramic 5+" is applied sparingly and carefully with the Fusionskin Ceramic Sponge microfiber applicator to the surface to be sealed in a so-called cross motion. The corresponding surfaces are first coated horizontally and then vertically. The amount of substrate can be varied in the application - however, there must be no dripping at the edges.
Finishing / rubbing off:
Ceramic 3+: service life 3-5 years / Ceramic 5+: service life 5-10 years
After approx. 2 - 4 minutes (at 20 degrees approx. 4 minutes, at 30 degrees approx. 2 minutes), gently rub the freshly sealed area with a microfiber cloth until a homogeneous surface is created (rub the sealant into the surface, so to speak). Then wipe with a 2nd clean microfiber cloth. Do not mix up the cloths in the repeat process (it is best to use different colored cloths).
Please consult a Fusionskin expert again for Ceramic 5+.
Curing:
The vehicle should not be exposed to the environment for at least 12 hours after sealing. Protect sealant from machanic influences for at least 7 days.
Safety Instructions:
Hazard
statements
H225 Highly flammable liquid and vapor. H302 Harmful if swallowed. H314 Causes
severe skin burns and eye damage. H317 May cause allergic skin reactions. H336
May cause drowsiness and dizziness. H412 Harmful to aquatic life with long
lasting effects.
Precautionary statements
P101 If medical advice is needed, have container or label at hand. P102 Keep
out of the reach of children. P210 Keep away from heat, hot surfaces, sparks,
open flames and other ignition sources. Do not smoke. P260 Do not breathe
dust/fume/gas/mist/vapor/aerosol. P264 Wash hands and face thoroughly after
use. P271 Use only outdoors or in well-ventilated areas. P280 Wear protective
gloves/protective clothing/eye protection/face protection. P301+P330+P331 IF
INTOXICATED: Rinse out mouth. DO NOT induce vomiting. P303+P361+P353 IF ON SKIN
(or hair): Remove all contaminated clothing immediately. Wash skin with water
or shower. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several
minutes. Remove any contact lenses if possible. Continue to rinse. P310
Immediately call a POISON CENTER/physician. P403+P235 Keep in a well-ventilated
place. Keep cool. P405 Keep locked up. P501 Dispose of contents/container to an
approved waste disposal facility.
Login